German Grade Calculator

This calculator converts a foreign grade to the German 1.0 to 5.0 scale with the modified Bavarian formula: German grade = 1 + 3 × ((Nmax − Nd) ÷ (Nmax − Nmin)). Enter the highest possible grade, the lowest passing grade and your grade. Universities and uni-assist make the final decision on how your grade is converted.

Convert your grade

Enter your grade to see the German equivalent.

Calculations run in your browser. Nothing you type is sent to us or stored.

Preset pass marks are common defaults. Check your own transcript or university grading scale and edit Nmin if it differs.

How the Bavarian formula works

German grades run from 1.0 (best) to 4.0 (lowest pass), and 5.0 is a fail. Most other countries grade the other way round, so a transcript has to be converted. The modified Bavarian formula (Modifizierte Bayerische Formel) is the method set out in the guidelines of the Kultusministerkonferenz (KMK) and used by uni-assist and many German universities.

German grade = 1 + 3 × ((Nmax − Nd) ÷ (Nmax − Nmin))
  • Nmax is the highest grade possible in your system.
  • Nmin is the lowest passing grade in your system.
  • Nd is the grade you achieved.

The result is checked against five German grade bands:

German grade bands
German gradeClassificationMeaning
1.0 to 1.5Sehr gutVery good
1.6 to 2.5GutGood
2.6 to 3.5BefriedigendSatisfactory
3.6 to 4.0AusreichendSufficient (pass)
Above 4.0Nicht ausreichendFail

This tool shows the result to two decimals, truncated to one decimal and rounded to one decimal. Universities and uni-assist can round or truncate differently, so check which method your target university uses. The classification above uses the truncated one-decimal value.

Worked examples

Percentage, 100 max and 50 pass, with 85%: 1 + 3 × ((100 − 85) ÷ (100 − 50)) = 1 + 3 × 0.3 = 1.9, which is Gut.

4.0 GPA scale, 2.0 pass, with a 3.5 GPA: 1 + 3 × ((4 − 3.5) ÷ (4 − 2)) = 1 + 3 × 0.25 = 1.75, which is Gut.

10.0 CGPA scale, 4.0 pass, with an 8.0 CGPA: 1 + 3 × ((10 − 8) ÷ (10 − 4)) = 1 + 3 × 0.3333 = 2.0, which is Gut.

Who this is for

Use it if you are applying to a German bachelor’s or master’s programme with a transcript from the US, South Asia, the UK or elsewhere, and you want to estimate your German equivalent before you apply through uni-assist or directly to a university such as TUM. It also helps when a programme lists a minimum German grade, such as 2.5 or better.

Common mistakes

  • Using the wrong minimum passing grade. Nmin comes from your institution’s own scale, not from the preset.
  • Entering your percentage on a 10-point CGPA scale, or the other way round.
  • Treating the result as an official conversion. Only the university or uni-assist can confirm it.
  • Comparing a rounded grade with a requirement that the university truncates.

Frequently asked questions

How do I convert my CGPA to a German grade?

Choose the CGPA preset or enter your own scale, add your CGPA as Nd, and read the result. The tool applies the modified Bavarian formula.

What is the lowest passing grade (Nmin)?

It is the lowest grade your institution counts as a pass. It is printed on your transcript or in your university’s grading scheme.

Is the German grade 1.0 or 4.0 better?

1.0 is the best grade. 4.0 is the lowest pass, and anything above 4.0 is a fail.

Does uni-assist use the same result?

uni-assist uses the modified Bavarian formula, but rounding and the pass mark it applies can differ from this estimate. Treat this result as a guide.

Is this an official calculator?

No. MarkBridge is an unofficial guide with no affiliation to the KMK, uni-assist or any university.

Sources & Verification

Official sources: Kultusministerkonferenz (KMK) and uni-assist.

Rule used: modified Bavarian formula (Modifizierte Bayerische Formel).

Last verified: November 2026

Related tools